Mastering Assessment Validation: How to Validate Assessments
Mastering Assessment Validation: How to Validate Assessments
Blog Article
With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.
Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.
In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.
The 2015 SRTOs Clause 1.8 requires RTOs to make sure their assessment systems, including RPL, are compliant with training package requirements and conducted per the Principles of Assessment and Rules of Evidence.
We must adhere to the standards by conducting two types of validation.
The primary validation type ensures compliance with the training package requirements for your RTO's assessments.
The second validation type ensures that assessments adhere to the principles of assessment and rules of evidence.
This suggests we perform validation both before and after the assessment. This article will concentrate on the first type—assessment tool validation.
What are the Two Types of Assessment Validation?
Clarifying Assessment Validation
As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also called pre-assessment validation, pertains to ensuring all unit requirements are addressed, as outlined in the first part of the clause, ensuring total workbook compliance.
Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
This discussion will center around assessment tool validation.
How to Properly Conduct Assessment Tool Validation
Understanding the two types of validation allows us to delve into the specifics of assessment tool validation.
Optimal Timing for Assessment Tool Validation
Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.
You don't have to wait for the next validation schedule in your 5-year cycle. Validate new resources as soon as you get them to ensure they’re suitable for students.
However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:
- resources are updated
- new training products are added by you on scope
- when course is reviewed against training product updates
- you identify your learning resources as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based regulatory approach means RTOs should conduct regular risk assessments. Complaints from students about learning resources are a prime opportunity for assessment tool validation.
How to Choose Training Products for Validation
Remember, this type of validation is to ensure all learning resources are compliant before use. All RTOs should validate all unit resources.
What You Need for Assessment Tool Validation
Academic Resources
To conduct assessment tool validation, you will need the entire suite of your learning resources:
Mapping tool – the initial document to investigate. It identifies which assessment items address unit requirements, helping speed up validation.
Learner/student workbook – ensure it's appropriate as an assessment tool. Check if the instructions are clear and answer fields are adequate. This is a frequent issue.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item exist. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – might include checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they fit the assessment task and address unit requirements.
Validation Board
Clause 1.11 outlines the criteria for validation panel members, specifying that validation can be done by one or more people. RTOs typically require all trainers and assessors to participate, occasionally inviting industry experts.
Together, your validation panel should possess:
Relevant vocational competencies and industry skills for the unit being validated
Current expertise and skills in vocational teaching and learning
Any one of these training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its replacement
Validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool is beneficial for both the validation process and documentation. It makes it easier to understand how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It can also serve as proof that you have validated your resources before allowing students to use them.
ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.
Assessment Principles Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Guidelines Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Look For?
As stated in our blog post Common Problems In Assessment Tools, you must ensure your assessment tools allow trainers to adhere to assessment principles and evidence rules.
Assessment Basic Principles
Fairness – Does the assessment process ensure equal opportunity and access for everyone?
Flexibility – Does the assessment accommodate different options to demonstrate competence according to various needs and preferences?
Validity – Is the assessment evaluating what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment produce the same results each time, regardless of who conducts the training? Will different assessors make consistent decisions on skill competence?
Core Rules of Evidence
Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there adequate evidence to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool prove that the work is the candidate’s own?
Currency – Do the assessment tools mirror current units of competency and modern industry practices?
Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.
To prevent using learning resources that do not meet some unit requirements, make sure to follow these guidelines:
Practice Your Teachings
Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following actions at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
nappying
prepare bottles, feed infants from bottles, and clean equipment
prepare solid food and feed infants
appropriately respond to baby signs and cues
prepare and settle babies for sleep
monitor and encourage age-appropriate physical exploration and gross motor skills
Having students explain changing nappies for babies under 12 months old doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the here tasks twice with one baby doesn’t meet the requirement.
Complete Compliance or Not Competent
Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Clarify Further
Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What kind of information can be included in a work package?
Answers might include:
Needed materials
Pertinent costs
Time allocated for activities
Appointed roles and responsibilities
When an assessment item calls for multiple answers, indicate the number of answers a student needs to provide. This way, your assessment is reliable, and the evidence gathered is valid.
This also applies to assessment items with double-barrelled questions or those that ask for multiple answers at once. These can confuse students and assessors, as shown in the sample question below:
Identify a hazard and/or environmental concern in the work area and select the most effective hazard control hierarchy.
Possible answers can include, but are not limited to:
Weather conditions – isolation of work area, engineering controls, personal protective equipment
Work area and ground conditions – elimination, isolating, engineering controls
People – isolation, use of engineering controls, administrative controls
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolating, engineering controls, administration
Equipment or machinery – isolating, engineering controls, administration
Avoiding double-barrelled questions makes it simpler for students to respond and for assessors to accurately judge competence.
Given these requirements, you might think, “Don’t learning resource developers provide audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This impacts your compliance history, so it’s wiser to take the safe and compliant route.